Community R1-66Z Features:
- Weather-resistant, all-fiberglass enclosure
- Weather-treated drivers and crossovers
- Corrosion-resistant zinc-rich epoxy dual-layer powdercoated steel grille and yoke
- Pattern control to below 500 Hz
- High efficiency
- Integral mounting points
- High power passive crossover
- High-fidelity, full-range reproduction of music andspeech
- Application-specific coverage pattern
- Optional “indoor” version available with a blackenclosure and no grille (model R1-64BNG)
- Five-year product warranty / Fifteen-year enclosure warranty
Community R1-66Z Specifications:
- Loudspeaker Type: 2-way horn loaded coaxial,weather-resistant
- Operating Range:
- 90 Hz to 16 kHz
- 110 Hz to 10 kHz (+/- 4 dB)
- Max Input Ratings: 200W continuous, 500W program, 40volts RMS, 89 volts momentary peak
- Recommended Power Amplifier: 420W to 600W @ 8Ohms
- Sensitivity (1W/1m):
- 105 dB SPL (100 Hz to 16 kHz 1/3 octave bands)
- 106 dB SPL (250 Hz to 4 kHz speech range)
- Maximum Output: 128 dB SPL / 135 dB SPL (peak)
- Nominal Impedance: 8 Ohms
- Minimum Impedance: 5.7 Ohms @ 230 Hz
- Nominal –6dB Beamwidth:
- 60° H (+18° / -20°, 1 kHz to 16 kHz)
- 60° V (+13° / -16°, 1 kHz to 16 kHz)
- 100° H x 100° V (400 Hz)
- Axial Q / DI: 20.3 / 13.1, 1 kHz to 16 kHz
- Crossover Frequency: 1.2 kHz
- Recommended Signal Processing: 90 Hz high passfilter
- Drivers:
- LF: 1x 12” weather-treated, Ferrofluid-cooled
- HF: 1x 1” exit, titanium diaphragm
- Driver Protection: PowerSense™ DDP
- Input Connection: 12 foot (4 m) SJOW #16 gauge
- Controls: None
- Enclosure: Hand-laminated fiberglass, lightgrey gelcoat
- Mounting/Rigging Provisions: (5) 1/2-13 riggingpoints
- Grille: 3-layer WeatherStop™, light grey(Zinc-rich epoxy dual-layer powder coated perforated steel grille, foam, wovenpoly mesh)
- Environmental Performance: IEC529 IP55W ratingwith a minimum 5-degree downward aiming angle
- Required Accessories: 90 Hz high pass filter
- Supplied Accessories: SSYR1 yoke bracket, lightgrey
- Optional Accessories: TRC400 400-watt70/100/140-volt transformer
- Dimensions:
- Height: 24.75 inches (629 mm)
- Width: 24.75 inches (629 mm)
- Depth: 29.75 inches (756 mm)
- Weight (without yoke): 47.5 lbs (21.5 kg)
- Weight (with yoke): 55.5 lbs (25.2 kg)
Reviews
There are no reviews yet.